How to flash EliteMovil Rom??

Before you flash:

1.Backup all your important files and data

2. Download the JVU stock firmware and the ELITEMOVIL Rom. (Download link provided below)

3. Make sure your phone is fully charged.

4.Disable and kill the Kies process from task manager. It will interupt the flashing process.

5.This guide is strictly for Samsung Galaxy S i9000 only.

*Caution

Update your phone at your own risk. I am not responsible on any damage of your devices arising from your usage on this tutorial or guide.

How to install JVU stock Firmware:

1. First, you need to flash the JVU stock firmware using odin. >>JVU Stock Firmware<<
2. After downloaded, extract the folder. The files included as followed:
• CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5
• GT-I9000-CSC-MULTI-OXAJVU.tar.md5
• MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
• s1_odin_20100512.pit
• Odin3
3. Launch the Odin3.
4. Put all the files into the respective fields in Odin3.
• PIT:  s1_odin_20100512.pit
• PDA: CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5
• PHONE: MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
• CSC: GT-I9000-CSC-MULTI-OXAJVU.tar.md5
5. Tick the Re-Partition
6. Reboot your phone into download mode (Press volume down + Home +Power Button). Yellow triangle will shown when reboot into download mode.
7. Connect your phone with PC via USB cable. Yellow ID:COM will shown if your device is detected.
8. After all the files are set, then click Start and your phone will be installed with JVU stock firmware.
9. After success, your phone will be reboot and JVU is installed. The setup wizard will shown up when as the phone rebooted, and make sure no boxes are tick. If the boxes are ticked as default, please un-tick it.
10. Proceed to the next step. How to install custom kernel.

How to install custom kernel?

1. Download the CF-Root kernel.>>CF-Root Kernel<<
2. Assume the Odin3 is still open, click Reset to reset all the field.
3. Put the downloaded ZIP files at PDA section
• PDA: CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.tar
4. Make sure the Re-partition is un-ticked.
5. Reboot your phone into download mode (Press volume down + Home +Power Button). Yellow triangle will shown when reboot into download mode.
6. Connect your phone with PC via USB cable. Yellow ID:COM will shown if your device is detected.
7. After all the files is set, then click Start. It takes about 10 seconds and your phone will reboot. 
8. Proceed to Final step: How to install EliteMovil Rom.

How to install the EliteMovil Rom:

1. You need to download the EliteMovil Rom. >>EliteMovil Rom<<
2. Copy the downloaded  EliteMovil Rom into the internal storage.
3. Reboot your phone into Recovery Mode (Volume Up + Home + Power Button)
4. Choose install zip files from sdcard > choose zip from sdcard > EliteMovil_V*_zip. It will take sometimes to install.
5. This rom will auto convert system into ext4.
6. This rom will wipe all. Once finish installed, do a restore from Go Launcher.
7. Finally, Enjoy the wonder of the EliteMovil Rom. 
8. For more details, you can visit the developer blog: >>EliteMovil XDA<<

Here is the add-on. 

1. Swype + Talk 2 >Here<  (Wipe Dalvik Cache and then install via CWM)
2. 14 Toggles Status Bar >Here<  (Wipe Dalvik Cache and then install via CWM)
3. Kies >Here<  (Install via CWM)
4. Teclado XT9 Samsung >Here<  (Wipe Dalvik Cache and then install via CWM)

Credit to Elitemovil for making this amazing rom.
Please visit Elitemovil for more detail.